JEEP Heavy Duty Flat Top Dana 30 / Rubicon Knuckles

The new Dana 30 / Rubicon 44 knuckle will transform late model Jeep axles into true contenders. The Reid knuckle adapts these axles to use early style Chevy & Jeep Dana 44 "outers". Early outers use tapered roller bearings eliminating the problematic unit bearings and allows standard lockout hubs to be used. Bigger brakes, more lug pattern options, and better aftermarket support come along as part of the conversion. The knuckles are also flat topped and drilled for high steer arm use. Uses stock pre-1987 Dana 44...

CHEVY Heavy Duty Flat Top Dana 44 Knuckles

Chevy/Jeep spindle bolt pattern accepts "outers" from all open knuckle Chevy and Jeep Dana 44, Dana 30, and 10-bolt front ends to 1986Cast from high strength ductile iron Beefed up with extra material and ribbing Flat tops machined and drilled for high steer arms 4th bolt hole for high steer arms increases clamping force and sheer strength (3 hole high steer arms still fit)3/8" thickness added to flat top of the knuckle for high steer tie rod to leaf spring clearance Cast-in DUAL steering stops eliminate bent stop bolts that can cause u-joint...

CHEVY Heavy Duty Dana 60 Kingpin Steering Knuckle

The strongest Dana 60 knuckles on the market Cast from high strength ductile iron Beefed up with extra material and ribbing 100% interchangeable with a Chevy kingpin knuckle 5th bolt hole for high steer arms (4 bolt arms still fit).Cast in steering stop eliminates bent stop bolts Tapered tie rod hole for 1 ton ends Tie rod holes can be drilled to accept 3/4" rod end Powder coated bright orange for long lasting looks Fully machined and ready for installation Left and right knuckles sold in pairs or individually Knuckles for off road use...

SCOUT Heavy Duty Flat Top Dana 44 Knuckles

Cast from high strength ductile iron Beefed up with extra material and ribbing Flat tops machined and drilled for high steer arms 4th bolt hole for high steer arms increases clamping force and sheer strength (3 hole high steer arms still fit) 3/8" thickness added to flat top of the knuckle for high steer tie rod to leaf spring clearance Cast-in DUAL steering stops eliminate bent stop bolts that can cause u-joint and axle failures ...

FORD Heavy Duty Dana 60 Kingpin Steering Knuckle

Cast from high strength ductile iron Beefed up with extra material and ribbing 100% interchangeable with a Ford kingpin knuckle except uses stronger Chevy tie rod ends 5th bolt hole for high steer arms (4 bolt arms still fit)Cast in steering stop eliminates bent stop bolts Accepts one ton Ford brakes with no modifications required Tie rod holes can be drilled to accept 3/4" rod end Powder coated bright orange for long lasting looks Fully machined and ready for installation Left and right knuckles sold in pairs or individually Ford versions are...

FORD Heavy Duty Flat Top Dana 44 Knuckles

Cast from high strength ductile iron Beefed up with extra material and ribbing Flat tops machined and drilled for high steer arms 4th bolt hole for high steer arms increases clamping force and sheer strength (3 hole high steer arms still fit) 3/8" thickness added to flat top of the knuckle for high steer tie rod to leaf spring clearance Cast-in DUAL steering stops eliminate bent stop bolts that can cause u-joint and...

CHEVY ARMLESS Heavy Duty Flat Top Dana 44 Knuckles

Based on our Heavy Duty Chevy Dana 44 knucklesChevy/Jeep spindle bolt pattern accepts "outers" from all open knuckle Chevy and Jeep Dana 44, Dana 30, and 10-bolt front ends to 1986Cast from high strength ductile iron Beefed up with extra material and ribbing Flat tops machined and drilled for high steer arms 4th bolt hole for high steer arms increases clamping force and sheer strength (3 hole high steer arms still fit)3/8" thickness added to flat top of the knuckle for high steer tie rod to leaf spring clearance Cast-in DUAL steering stops...

DANA 60 INNER C

ALL NEW FORGED DANA 60 KINGPIN INNER "C"S Right and left sides are the samePART NUMBER BORE TUBE SIZE D60005-1 2.7475 2-3/4" D60005-2 2.9975 3" D60005-3 ...

CHEVY Stock Replacement Heavy Duty Flat Top Dana 44 Knuckle (right)

Chevy/Jeep spindle bolt pattern accepts "outers" from all open knuckle Chevy and Jeep Dana 44, Dana 30, and 10-bolt front ends to 1986Based on our Heavy Duty Chevy Dana 44 knucklesCast from high strength ductile iron Beefed up with extra material and ribbingDesigned to be a direct replacement for a passenger side Chevy Dana 44 knuckle Flat tops machined and drilled for 3-hole high steer arms, not raised the additional 3/8" for high steer tie rod to leaf spring clearance as are our other Dana 44 knuckes. ...